Description
XW MPPT80-600 Solar Charge Controller The XW MPPT 80 600 is an innovative solar charge controller that offers an industry-first set of features: high PV input voltage (up to 600 Vdc), Maximum Power Point Tracking (MPPT), and 80 A charge current. 600 Vdc PV input voltage delivers lower installation costs through fewer PV strings, longer home runs, smaller wiring and conduit, and virtual elimination of PV combiner boxes and circuit breakers. MPPT technology helps harvest the most energy available from the PV array, regardless of environmental conditions. 80 A battery charge current allows for connection of arrays rated at up to 4800 W (48 V battery bank). Features: Up to 600 Vdc input Full Power Range: 230 to 550 Vdc Operating Range: 195 to 550 Vdc MPPT Range: 195 to 510 Vdc PV Array Start Voltage: 230 Vdc 80 A Output; 48 V or 24 V Battery (nominal) Full Power (4,800 W; 2,560 W) up to 45 C (113 F) Fast Sweep MPPT Algorithm Two- or Three-stage Battery Charger, Plus EQ Battery Type Settings: FLA, AGM, Gel, Custom Battery Temperature Compensation High Efficiency: 96% nom @ 48 V; 94% nom @ 24 V Low Tare Loss (0.5 W; Xanbus Power Supply Off) Built-in GFP and Indicator Input Over-voltage and Over-current Protection Output Over-current and Back-feed Protection Over-temperature Protection PV Cell Compatibility: Mono, Poly, String, Thin-Film Selectable PV Array Grounding: (+), (-), or ungrounded Positive or Negative System Ground Xanbus Compatible with AGS, Gateway, SCP, and XW AUX Output (dry contact, form �C�) PDP Mounting Compatible (30� x 8.5� x 8.5�) Variable Speed Cooling Fans Specifications: Nominal battery voltage 24 and 48 V (Default is 48 V) Max. PV array voltage (operating) 195 to 550 V Max. PV array open circuit voltage 600 V Max. PV array input current 35 A Max. and min. wire size in conduit #6 AWG to #14 AWG (13.5 to 2.5 mm2) Charger regulation method: Three-stage (bulk, absorption, float) Two-stage (bulk, absorption) Power consumption
